Soften FrogzEggz in hot water

Pratley FrogzEggz must be heated to above 60°C for it to be soft and workable. The most convenient method is to boil water in a kettle and pour it into a cup then add the required quantity of FrogzEggz.

Watch for colour change 

FrogzEggz will be ready for use in about 1 minute after placing in hotwater, i.e. once they change from opaque to transparent. 

Remove FrogzEggz from the water with the back end of a teaspoon or similar stick to avoid burns. The FrogzEggz will clump together and come out as one. 

Mould

Hand mould and shape FrogzEggz to the desired form.

Colour

If desired, coloured pigments including Pratley "Glow-Powder" Glow in the Dark Pigment may be mixed into your FrogzEggz before moulding. Remove FrogzEggz from hot water and sprinkle the powder onto the FrogzEggz while it is still soft and manageable, fold and mix until a uniform colour is achieved. (Reheat may be necessary). 

Cool&Set 

When you are happy with your shape and design, simply leave your FrogzEggz to cool or submerge your FrogzEggz creation in cold water for it to set. 

Reheat (Optional) 

If at any time you are not happy with your design, simply submerge it in hot water again so that it can be remoulded.